![]() ![]() We've watched at least 10 YT videos just to confirm its all plugged in as it should be. Wraith Prism Cooler - Gently used - Always taken care of - Comes with all original packaging, manuals and cords - Original thermal paste used (will need to apply some) Cooled my Ryzen 7 3700x extremely well, however, was gifted an AIO and I decided to switch. The software refuses to detect it and no manual control of the RGB is possible. AMDs Wraith Max is quieter than the CM 212 EVO in both idle and under load. What's the issue here? The cooler is lit up and working fine by itself. We even tried another socket and Windows confirmed it's been connected because we heard the Windows sound when a USB is plugged in. After checking again we confirmed the USB cable is plugged in on the motherboard into the correct USB socket. However, when I run the Coolermaster software tells me this 'plug in your cm device to get started'.Īfter searching online, the main reason for this is because the RGB cable is being used when the USB cable needs to be. Once the cooler was fitted and JUST the USB cable was connected (NOT the RGB cable) and the above software had been installed. The software required to do this is the Coolermaster AMD Ryzen Wraith Max RGB control. Its to replace the stock cooler.īefore purchasing the cooler i did some research and discovered that the RGB can be controlled by plugging the USB cable from the cooler onto the correct socket on the motherboard. So today a friend installed the AMD Wraith Prism RGB LED Heat Sink Cooler - for me.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |